Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

This short video guide shows how to replace the cabin air filter on a fourth-generation Renault Clio, produced from 2012 to 2019. To make the operation easier, remove the glove compartment before starting, as shown in the tutorial video. The filter is located on the floor of the car at the back of the centre tunnel; to remove it, first take off the plastic cover from the passenger side, then extract the filter from its housing.

Finally, insert a new filter, ensuring it is oriented correctly.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Change the Cabin Filter on a Renault Clio
How to Change the Cabin Filter on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Changing a worn cabin filter? Let's look at replacing the cabin air filter on a Renault Clio. Disconnect the plastic cover of the air filter housing …
How to Replace the Cabin Filter on a Renault Clio
How to Replace the Cabin Filter on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) To replace the cabin filter on a Renault Clio, completely detach the panel located on the left side of the footwell on the passenger side. Once this …
Replacement of the cabin air filter of the Renault Clio
Replacement of the cabin air filter of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The information provided in this guide will allow us to remove and replace the cabin air filter of the Renault Clio. First, we open the front door on…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos