Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to replace or install speakers on Renault Clio

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Loudspeaker
Operation: How to replace or install speakers on Renault Clio

In this short and simple guide we will see the steps that will allow us to disassemble and replace the speakers, both front and rear, of the Renault Clio. First of all, we open the door and begin to disassemble and remove the door panel, by unscrewing the fixing screws that we find on the grip handle and on the opening one; for headlight we use a torx screwdriver, as shown in the video. At this point we unscrew the fixing screws of the speaker, disconnecting the electrical connector that we find on the back to remove and replace the case with the new one!


Posted on 16 May 2023 by ScegliAuto



How to replace the car radio speakers on Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) If we want to change one or more speakers, on our Renault Clio 3; you must first inquire about its dimensions (diameter) and the connectors that must
With replacing the speakers of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today we will see the instructions that will allow us to disassemble and replace the speakers of the front door of the Renault Clio. As a first step,
How to remove the speakers of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The removal of the front and rear speakers integrated into the doors obviously requires the removal of the panels that line the inside of the doors;

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos