Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speakers in a Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Speaker

Today, you will learn how to remove and replace the front door speakers in a Renault Clio. First, open the front door and start by removing the door panel. Unscrew all the fixing screws and disconnect the electric connector from the window switch; finally, disconnect the handle cable, as shown in the video. At this point, grind down the speaker rivets and disconnect the electric connector found on the back; replace it with the new one and reassemble everything!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the speakers of the Renault Clio 4
How to replace the speakers of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today we will explain how to replace the speakers on a Renault Clio car. The speakers we will be replacing on the Clio are the HERTZ DCX model with 8…
How to replace the front speakers of the Renault Clio
How to replace the front speakers of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this guide, we will see step-by-step instructions that will allow us to disassemble and replace the front speakers of the Renault Clio. First of a…
How to replace the front speakers of the Renault Clio
How to replace the front speakers of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today's instructions will show us how to disassemble and replace the front door speakers of the Renault Clio. First, we open the front door and start…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos