Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Speakers on the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Speaker

See other generations:
Video tutorial

Today's instructions will show you how to dismantle and replace the front door speakers on the Renault Clio. First, open the front door and begin to dismantle and remove the door panel by unscrewing all the fixing screws and disconnecting the electric connector for the window switch; then unscrew the fixing screws on the sides to detach and remove the speaker, disconnecting the electric connector found on the back, as shown in the video.

At this point, install the new speaker and finally reassemble the door panel!


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Replace the Car Radio Speakers on a Renault Clio 3
How to Replace the Car Radio Speakers on a Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) If you want to change one or more speakers in your Renault Clio 3, first check their dimensions (diameter) and ensure the connectors are suitable for…
How to Replace the Front Speakers on the Renault Clio
How to Replace the Front Speakers on the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this guide, we will see step-by-step instructions that will allow us to remove and replace the front speakers on the Renault Clio. First, open the…
How to Replace or Install Speakers on the Renault Clio
How to Replace or Install Speakers on the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this short and simple guide, you will see the steps to remove and replace the speakers, both front and rear, of the Renault Clio. First, open the …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos