Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Speakers on the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Speaker

See other generations:
Video tutorial

In this guide, we will see step-by-step instructions that will allow us to remove and replace the front speakers on the Renault Clio. First, open the front door and start by removing the door panel, unscrewing all the securing screws and disconnecting the electrical connector of the window switch; finally, disconnect the opening handle cable, as shown in the video.

At this point, unscrew the screws of the speaker and disconnect the electrical connector located at the back, replacing the speaker with the new one, applying the reverse procedure for reassembly!


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Replace the Car Radio Speakers on a Renault Clio 3
How to Replace the Car Radio Speakers on a Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) If you want to change one or more speakers in your Renault Clio 3, first check their dimensions (diameter) and ensure the connectors are suitable for…
How to Replace or Install Speakers on the Renault Clio
How to Replace or Install Speakers on the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this short and simple guide, you will see the steps to remove and replace the speakers, both front and rear, of the Renault Clio. First, open the …
How to Replace the Speakers in the Renault Clio?
How to Replace the Speakers in the Renault Clio?
Renault Clio (1998-2005 / MK 2, Clio 2) To replace the speakers in the Renault Clio, use a lever tool to detach the cover grille that conceals the speaker on the lower part of the door pane…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos