Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Bulbs on the Renault Clio 4?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Light bulb

Change the rear bulbs on the Renault Clio 4 by following these steps: 1) lift the boot lid; 2) remove the two Torx screws next to the rear light; 3) pull out the plastic panel; 4) pull the light with both hands and remove it from its housing; 5) disconnect the electrical connector; 6) using a flat screwdriver as a lever, unclip the bulb holder from its housing; 7) remove the blown bulb you wish to replace; 8) install the new bulb; 9) reposition the bulb holder; 10) place the light back in position, reconnect the electrical plug, replace the plastic panel, and the two screws.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights on a Renault Clio?
How to replace the rear lights on a Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) In this tutorial, we can see how to replace the tail lights on the Renault Clio, an extremely simple and quick operation. First of all, let's make su…
How to Change the Front Headlight Bulb on a Renault Clio
How to Change the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Are the bulbs damaged on your Renault Clio? Here’s how to replace the bulbs in the front headlamp. Open the front bonnet by pulling the lever located…
How to Replace the Rear Light Bulbs on a Renault Clio?
How to Replace the Rear Light Bulbs on a Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the rear bulbs on a Renault Clio, you need to distinguish between the reverse lights and the other bulbs: the reverse lights can be replac…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos