Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Modus
    4. : Cabin air filter replacement

Renault Modus - Video tutorial

Model: Renault Modus MK 1 - Years 2004-2013
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter is located on the passenger side, immediately under the glove compartment: in order to be able to replace it, it is therefore necessary to remove the sound-absorbing lining located above the heel plate in order to access the air conveyor and extract the old filter; make sure that there are no residues of dirt inside the filter container and insert the new one (we recommend the activated carbon one) orienting it according to the direction of the air flow indicated by the arrows on the filter itself: in this phase it may be necessary slightly deform the filter.


Posted on 29 August 2023 by ScegliAuto



Replacement of the cabin air filter of the Renault Modus
Renault Modus (2004-2013 / MK 1) Let's see in this guide the necessary instructions to disassemble and replace the cabin air filter of the Renault Modus. First of all, we get inside
Cabin air filter replacement
Renault Modus (2004-2013 / MK 1) The cabin air filter is located just behind the central tunnel console: then access from the passenger side until you intercept the filter container
How to replace the cabin air filter
Renault Modus (2004-2013 / MK 1) The cabin air filter is something you can change yourself, just follow the procedure indicated in the guide. It is a maintenance that must be perform

    Frequently Asked Questions

    • Modus 2004-2013 - Where is the cabin air filter located on the Renault Modus? Read Answer
    • Modus 2004-2013 - Where is the pollen filter of the 2005 Renault Modus located? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos