Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light of the Renault Modus

Model: Renault Modus MK 1 - Years 2004-2013
Part:

Below we will see the steps that will allow us to disassemble and replace the bulbs and the third brake light of the Renault Modus. First, we open the rear tailgate of the trunk and start pressing on the hole located behind the third brake light to release it from the outside; then disconnect the electrical connector of the bulbs to remove it, as shown in the video. At this point, if necessary, we replace only the bulbs or the entire brake light, then check the functioning of the stop lights; all that's left is to secure the third brake light to the body!

Posted on 26 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing Third Brake Light Renault Modus
Removing Third Brake Light Renault Modus
Renault Modus (2004-2013 / MK 1) In this tutorial, learn how to remove the third brake light on a Renault Modus, in case you need to replace the bulbs. First, open the boot and remov…
How to Replace the Rear Headlamp Bulb on a Renault Modus?
How to Replace the Rear Headlamp Bulb on a Renault Modus?
Renault Modus (2004-2013 / MK 1) To replace the rear headlamp bulb on a Renault Modus, open the rear hatch to access the side of the boot. Here, open the cover corresponding to the b…
Replacing the Front Headlight Bulb on a Renault Modus
Replacing the Front Headlight Bulb on a Renault Modus
Renault Modus (2004-2013 / MK 1) If the position light bulb on your Renault Modus has blown, replace it as soon as possible for safety. Open the bonnet and stand in front of the head…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos