Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Third Brake Light Renault Modus

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Light bulb

Video tutorial

In this tutorial, learn how to remove the third brake light on a Renault Modus, in case you need to replace the bulbs. First, open the boot and remove the caps found in the bodywork: press inside the holes to release the third brake light from the vehicle.

At this point, the third brake light will come out, allowing you to remove and replace the bulb. If you want to completely remove the third brake light, disconnect the electrical connector located at the rear of the unit and replace it with the new one, reconnecting the electrical connector.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to replace the third brake light of the Renault Modus
How to replace the third brake light of the Renault Modus
Renault Modus (2004-2013 / MK 1) Below we will see the steps that will allow us to disassemble and replace the bulbs and the third brake light of the Renault Modus. First, we open th…
Where is the OBD port located on the Renault Modus?
Where is the OBD port located on the Renault Modus?
Renault Modus (2004-2013 / MK 1) In this new guide aimed at all of you who own a Renault Modus, we will help you easily find the OBD port located inside the cabin and through which y…
How to check the brake oil on a Renault Modus
How to check the brake oil on a Renault Modus
Renault Modus (2004-2013 / MK 1) How do you check the brake oil on a Renault Modus? We see it in this video. In the meantime, it is not exactly within reach, because to access it we …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos