Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the air filter in a Renault Modus

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air filter

Video tutorial

To replace the air filter on a Renault Modus, open the bonnet and locate the air filter box in the engine compartment, connected to the intake pipe. Remove the clips or unscrew the screws that secure the cover of the box. Lift the cover and extract the used filter.

Clean the inside of the box from dust and debris. Insert the new filter, respecting the orientation indicated by the arrows on the filter.

Reposition the cover of the box and secure it again with the clips or screws. Close the bonnet and start the engine to check proper operation and ensure good air filtration in the engine.


Posted on 31 October 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Renault Modus
How to replace the air filter of the Renault Modus
Renault Modus (2004-2013 / MK 1) Thanks to the steps described in the following guide, you will be able to replace the engine air filter of your Renault Modus by yourself. Before sta…
How to Replace Cabin Air Filter on Renault Modus
How to Replace Cabin Air Filter on Renault Modus
Renault Modus (2004-2013 / MK 1) If it's time to replace the cabin air filter on your Renault Modus but you don't know how to do it, simply read the following guide carefully and app…
How to Replace the Engine Air Filter on a Renault Modus
How to Replace the Engine Air Filter on a Renault Modus
Renault Modus (2004-2013 / MK 1) Before you begin, open the front bonnet of your Renault Modus. Start by removing the upper engine cover by unscrewing the fixing screws. Then, unclip…

How to Fix Code 84 Issue on the Chevrolet Cruze

In this video, you will see how to resolve the Code 84 issue when it appears on the instrument panel of the Chevrolet Cruze. The YouTuber uses an OBDII scanner connected to the EOBD port to correctly decode the error, which relates to the accelerator pedal that does not respond during engine acceleration. The solution is to check the throttle body, which helps send fuel to accelerate the vehicle; it was indeed damaged, and once replaced, the error code is cleared, allowing the vehicle to accelerate normally again.

Watch the video!


by ScegliAuto

More videos