Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Drop Link

Model: Renault Laguna MK III, Laguna 3, MK 3, Laguna III, X91 - Years 2007-2015
Part: Control arm

If you notice noise from the front end while driving over rough terrain, it is likely that the drop link (commonly known as the stabiliser link) connecting the shock absorber to the stabiliser bar has been damaged. To replace it, lift the vehicle on a hydraulic lift and remove the front wheel. Insert a spanner onto the nut securing the drop link, then use another spanner on the ball joint pin to hold it steady during removal, from both the shock absorber side and the stabiliser bar side. Remove the old drop link, insert the new one, and secure it in the same manner. It is recommended to replace both drop links.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide for replacing the heating radiator on Renault Laguna 1
Guide for replacing the heating radiator on Renault Laguna 1
Renault Laguna (1994-2001 / X56, Laguna 1, MK 1) In this guide we will show you the main instructions to be able to remove and replace the radiator of the passenger compartment heating on the Renaul…
Instructions for Replacing the Camshaft
Instructions for Replacing the Camshaft
Renault Laguna (2001-2007 / Laguna 2, MK 2, X74) Before proceeding with the installation of the new camshaft, lubricate the sliding seats as well as the valve lifters; then apply the camshaft, lubri…
Rear Shock Absorber Replacement
Rear Shock Absorber Replacement
Renault Laguna (2007-2015 / MK III, Laguna 3, MK 3, Laguna III, X91) Replacing the rear shock absorbers is extremely simple and does not require access to the boot for removal: everything is done from the outside; lift…

How to Change the Cabin Filter on a Fiat Punto Evo

How to change the air conditioning pollen filter on a Fiat Punto Evo? Remove the plastic cover of the centre tunnel (right side of the tunnel), then remove the plastic cover from the filter cap (located inside the centre tunnel), and extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing: refit the filter cap and secure the container (close the glove compartment located in the centre tunnel). Check the correct installation of the previously fitted parts.

Watch the video!


by ScegliAuto

More videos