Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cooling radiator for the Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Radiator

In this guide, we will see the procedure that will allow us to disassemble and replace the engine cooling radiator of the Renault Megane. First, we open the engine hood of our car and start unscrewing the fixing screws that we find on the upper part of the front bumper; then we remove the plastic clips, in order to remove the upper part, as shown in the video. At this point, we unscrew the screws of the radiator brackets, disconnecting the pipes and the fan connection; we then install the new radiator, topping it up with the new antifreeze fluid!

Posted on 16 July 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the engine cooling fan of the Renault Megane
Replacement of the engine cooling fan of the Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) In this guide, we will see the main steps that will allow us to disassemble and replace the engine cooling fan of the Renault Megane. First, we open …
Engine oil replacement on Renault Megane
Engine oil replacement on Renault Megane
Renault Megane (1995-2003 / Megane 1) Replacing the engine oil on a Renault Megane? Let's see the oil replacement. We lift the car on a pillar or jack bridge, unscrew the pin of the oil p…
Where are the fuses located in the Renault Megane?
Where are the fuses located in the Renault Megane?
Renault Megane (2008-2015 / Megane 3, Megane III) The operation of the devices installed on the Renault Megane is managed by the fuses located inside the appropriate boxes. In this car model, it will…

Other guides you may be interested in

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos