Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the rear bulbs of the Renault Twingo 2?

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Light bulb

Let's open the trunk and unscrew the screw that we find inside, corresponding to the headlight. Once the screw is removed, we can also remove the electrical connector by levering on the plastic tab. Now the rear headlight is free and we can extract it by pulling it with our hands towards the outside of the car. Remove the plastic tabs and open the headlight. Check the condition of the bulbs and replace any burnt out ones, being careful not to touch the glass with your fingers. Reinstall the headlight in its place and connect the electrical connector. Repeat the operation with the other headlight.

Posted on 17 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace headlight bulbs on Renault Twingo
How to replace headlight bulbs on Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) How to replace headlight bulbs on Renault Twingo? We open the front hood by pulling the lever located at the bottom left of the dashboard, let's put …
How to replace the Renault Twingo instrument cluster bulbs
How to replace the Renault Twingo instrument cluster bulbs
Renault Twingo (2007-2014 / Twingo 2) Let's see in this guide the main steps to remove and replace the Renault Twingo instrument cluster bulbs. First we get on board the car and start by …
How to change the headlight bulb of the Renault Twingo
How to change the headlight bulb of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this brief guide, we will see the procedure for disassembling and replacing the headlight bulb of the Renault Twingo. First, we open the car's hoo…

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos