Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the headlight bulb of the Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Headlight bulb

In this brief guide, we will see the procedure for disassembling and replacing the headlight bulb of the Renault Twingo. First, we open the car's hood and start removing the plastic cap that protects the bulbs; then we disconnect the electrical connector and release the metal clip to remove the low beam bulb, as shown in the video. At this point, we install the new bulb, of the correct type (in this case, H4); if necessary, we also replace the position light, performing the same replacement on the opposite side!

Posted on 26 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb of the Renault Twingo?
How do you replace the front headlight bulb of the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) To replace the headlight bulb of the Renault Twingo, you need to open the hood so that you can access the inner area of the corresponding optical gro…
How do you replace the front headlight bulb of the Renault Twingo?
How do you replace the front headlight bulb of the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) In order to replace the headlight bulb of the Renault Twingo, you need to open the hood so that you can access the components inside the engine compa…
How to Replace the Headlight Bulb on a Renault Twingo
How to Replace the Headlight Bulb on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Before starting, open the front bonnet of your Renault Twingo. Begin by unfastening the clip that secures the inner cover of the blown bulb, then mov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos