Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulbs of the Renault Twingo II

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Light bulb

In this video we can see how to change the fog light bulb of a Renault Twingo II: It is advisable to lift the car off the ground using a jack, to better access the lower part of the front bumper, where we will enter to reach the bulb of the fog light, which is located at the lower edge of the bumper. Now we need to remove the electrical connector that connects the lamp to the electrical system. The space is tight, but we should be able to do it, maybe using a flat head screwdriver. Then we remove the bulb and replace it with the new one, being careful not to touch the bulb with bare hands. Put the electrical connector back in place; we can lower the car, the operation is complete.

Posted on 17 August 2024 by ScegliAuto

Video tutorial

Related tutorials

…
How to Replace the Fog Light Bulb on a Renault Twingo 1
How to Replace the Fog Light Bulb on a Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) If one of the fog light bulbs on your first-generation Renault Twingo has stopped working suddenly, you need to replace it with a new one as soon as …
How to Replace the Bulb in the Rear Light of a Renault Twingo?
How to Replace the Bulb in the Rear Light of a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) This guide focuses on the Renault Twingo 2 and the replacement of one of the bulbs in the rear light assembly. All car owners know that over time, th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos