Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Front Bumper of the Renault Twingo

Model: Renault Twingo Twingo III, Twingo 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Front bumper

See other generations:
Video tutorial

This short and simple guide illustrates the procedure for dismantling and replacing the front bumper of the Renault Twingo. First, open the bonnet of the vehicle and start unscrewing all the securing screws found on the top and bottom of the bumper, also removing the various plastic clips; then unscrew the additional screws located on both sides of the front wheel arches, as shown in the video.

At this point, gently unclip the bumper from the sides until it is completely removed, replacing it with a new one if necessary; then reassemble everything!


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on a Renault Twingo
How to Remove the Front Bumper on a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) Below are the instructions needed to remove and replace the front bumper on a Renault Twingo. First, raise the vehicle at the front and start unscrew…
How to Remove the Rear Bumper of the Renault Twingo?
How to Remove the Rear Bumper of the Renault Twingo?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To remove the rear bumper of the Renault Twingo, loosen the screws securing the piece to its housing. These screws will be located at the bottom of t…
Removing the Front Headlight of the Twingo
Removing the Front Headlight of the Twingo
Renault Twingo (2007-2014 / Twingo 2) How to remove the front headlight of a Renault Twingo? Let's see how to disassemble the front headlight. Before removing the front headlight, you nee…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos