Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Renault Twingo?

Model: Renault Twingo Twingo III, Twingo 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper of the Renault Twingo, loosen the screws securing the piece to its housing. These screws will be located at the bottom of the component and inside the rear wheel arches.

You will also need to open the boot to locate the screws securing the bumper from the top. Once these are loosened, you can completely slide out the old bumper from its position, allowing you to replace it with a new one that should be installed properly.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on a Renault Twingo?
How to Remove the Rear Bumper on a Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) In this tutorial, you will learn how to remove the rear bumper on a Renault Twingo, a very simple and quick operation. First, go to the back of the v…
How to Remove the Rear Bumper on a Renault Twingo 3
How to Remove the Rear Bumper on a Renault Twingo 3
Renault Twingo (2014-2024 / Twingo III, Twingo 3) The operation mentioned is undoubtedly part of extraordinary maintenance, as it may be due to having sustained a bump, thus requiring repair and repa…
How to Remove the Front Bumper on a Renault Twingo
How to Remove the Front Bumper on a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) Below are the instructions needed to remove and replace the front bumper on a Renault Twingo. First, raise the vehicle at the front and start unscrew…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos