Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Twingo
    4. : How to disassemble the front bumper of the Renault Twingo.

Renault Twingo - Video tutorial

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2023
Part: Front bumper
Operation: How to disassemble the front bumper of the Renault Twingo.

Below we will see the necessary instructions to disassemble and replace the front bumper of the Renault Twingo. First, lift the car on the front side and start unscrewing the fixing screws found on both sides of the front wheel arches. Then, unscrew the additional screws found on the lower part of the bumper, using a T20 torx screwdriver, as shown in the video. At this point, remove the front hood to detach and permanently remove the bumper. All that's left is to reassemble everything by applying the reverse procedure of disassembly!


Posted on 21 November 2023 by ScegliAuto



How to disassemble the front headlights in the Renault Twingo?
Renault Twingo (2014-2023 / Twingo 3, Twingo III) In this tutorial, we can see how to disassemble the front headlights in the Renault Twingo. First of all, make sure that the key is not inserted, the
Remove the Twingo headlight
Renault Twingo (2007-2014 / Twingo 2) How to remove the headlight of the Renault Twingo? Let's see the disassembly of the front light. Before disassembling the headlight, we need to remov
How do you replace the headlight on the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) To be able to replace the headlight on the Renault Twingo, you have to go and open the hood, so that you can access the screws that fix the correspon

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos