Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Renault Twingo

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Front bumper

Today we will explain how to remove the front bumper of the Renault Twingo. Its removal is simple and quick despite it may seem complicated for inexperienced people, the removal of the bumper follows a few steps and only one tool to use. We start the removal by removing the side screws of the bumper, using a 25 mm Torx key. After removing the side screws, we move on to removing the clips located on the bottom screws and then remove them. Then we move on to the upper part of the bumper. We open the hood and unscrew the upper screws on the sides. We remove the bumper.

Posted on 31 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear bumper of the Renault Twingo?
How do you remove the rear bumper of the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In order to remove the rear bumper of the Renault Twingo, you need to loosen the screws that fix the piece to its housing: these screws will be locat…
How to Remove the Front Bumper on a Renault Twingo
How to Remove the Front Bumper on a Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Below are the instructions needed to remove and replace the front bumper on a Renault Twingo. First, raise the vehicle at the front and start unscrew…
Removing the Front Headlight of the Twingo
Removing the Front Headlight of the Twingo
Renault Twingo (2007-2014 / Twingo 2) How to remove the front headlight of a Renault Twingo? Let's see how to disassemble the front headlight. Before removing the front headlight, you nee…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos