Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front fog light bulb of the Renault Twingo.

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

The steps to replace the front headlight bulb of the Renault Twingo 2 is a simple and quick operation that can be done independently. First, turn off the car's engine, engage the handbrake, and pull the hood release lever to access the headlight.

To reach the headlight bulbs, we need to remove the headlight cover by pressing on the tab; then, press on the connector to disconnect it and on the side of the bulb to remove and replace it. Once the new bulb is inserted, reconnect the connector and close the headlight cap. Repeat the same procedure to replace the right front headlight bulb, then close the front headlight once all steps are completed, and finally turn on the lights to test the headlight functionality.


Posted on 12 December 2025 by ScegliAuto


Related tutorials

How do you replace the front headlight bulb of the Renault Twingo?
How do you replace the front headlight bulb of the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) In order to replace the headlight bulb of the Renault Twingo, you need to open the hood so that you can access the components inside the engine compa…
How to Replace the Headlight Bulb on a Renault Twingo
How to Replace the Headlight Bulb on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Before starting, open the front bonnet of your Renault Twingo. Begin by unfastening the clip that secures the inner cover of the blown bulb, then mov…
Replacing the Front Headlamp Bulb on Renault Twingo 3
Replacing the Front Headlamp Bulb on Renault Twingo 3
Renault Twingo (2014-2024 / Twingo III, Twingo 3) Today, you will see how to remove and replace the front headlamp bulb on a second-generation Renault Twingo. First, open the bonnet and remove the ru…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos