Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How do you remove the rear door panel of the Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio MK 4, Clio IV, Clio 4 - Years 2012-2019
Part: Door panel
Operation: How do you remove the rear door panel of the Renault Clio?

In order to remove the rear door panel, you will need to use an object like a screwdriver to pry and detach the window crank handle and the internal seat of the handrail by unscrewing the corresponding screw. Then, you will need to loosen the screw located in the seat of the internal handle and the one located in the upper left part of the panel. Once these two screws have been loosened, it will be possible to completely detach the old door panel so that the new replacement piece can be properly installed and secured.


Posted on 16 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Clio 1998-2005 - How to remove the door panel on Renault Clio 2? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos