Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulbs on the Renault Clio?

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Interior dome light bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the interior light bulbs on the Renault Clio, a very simple and quick operation. First, go inside the cabin, then using a plastic spatula to avoid leaving any marks, carefully pry off the light fitting around its entire perimeter.

Next, release the bulb holders by unlocking the clips, open them, and remove the old bulb. At this point, you can insert the replacements, avoiding direct contact with the glass, and reassemble everything by following the reverse procedure.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Change the Front Headlight Bulb on a Renault Clio
How to Change the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Are the bulbs damaged on your Renault Clio? Here’s how to replace the bulbs in the front headlamp. Open the front bonnet by pulling the lever located…
How to Remove the Front Headlamp Bulbs on a Renault Clio
How to Remove the Front Headlamp Bulbs on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) See how to remove the front headlamp bulbs on a Renault Clio. Open the bonnet by pulling the bonnet release lever and secure it. Remove the cap that …
Replacing Front Lights on Renault Clio
Replacing Front Lights on Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, you will learn how to replace the H7 dipped beam bulbs on the Renault Clio. In this case, we will install bulbs different from traditi…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos