Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlight Bulb on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Are the bulbs damaged on your Renault Clio? Here’s how to replace the bulbs in the front headlamp. Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Disconnect the headlamp cover cap (located at the rear of the headlamp).

You will find the bulbs with metal clips once the cover caps are removed. Pull the bulb holder out of the headlamp and extract the damaged bulbs using a screwdriver.

Fit the new bulbs (always of the correct type and size) and insert the bulb holder back into the headlamp housing. Turn on the lights and check if they work.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following instructions will allow you to remove and replace the front headlight bulb on a Renault Clio. First, open the engine bonnet of the vehi…
How to Replace the Front Headlamp Bulb on a Renault Clio 3
How to Replace the Front Headlamp Bulb on a Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the front headlamp bulb on your Renault Clio 3, open the bonnet to access the components in the engine bay. Locate the protective cover of…
How to Replace the Front Headlamp Bulb on the Renault Clio 4
How to Replace the Front Headlamp Bulb on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the front headlamp bulb on the Renault Clio 4, open the bonnet and access the inside of the headlamp corresponding to the bulb to be repla…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos