Do it yourself
Frequently asked questions about cars and motorcycles

Fuse box and fuse positioning of the Renault Clio.

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Fuse box

Today we will see the information that will allow us to discover the positioning and diagram of the fuses of the Renault Twingo. First of all, we open the front left door and start removing the plastic cover located on the side of the dashboard, thus accessing the internal fuse box; instead, we find the external fuse box in the engine compartment, removing the plastic cover that we find on the right (next to the battery), as shown in the video. At this point, we use the fuse diagram and diagram reported in the vehicle's owner's manual!

Posted on 2 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide briefly outlines how to locate the fuse boxes and their diagram for the Renault Clio. First, get inside the vehicle and locate the interna…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this guide, we will see the information related to the internal fuse scheme and diagram of the Renault Clio. First, we open the front driver's sid…
Renault Clio (1990-1998 / Clio 1, MK 1) This guide provides instructions on where to find the fuse boxes and how to obtain the diagram for the Renault Clio. First, open the bonnet and start…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos