Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light from a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light

See other generations:
Video tutorial

In this video, we will see how to remove the third brake light from a Renault Clio. First, open the boot lid and remove the plastic rivets with a screwdriver, then close the boot. Extract the third brake light from the metal of the boot lid using your hands.

Once the piece is removed from its housing, disconnect the power connector and attach the new third brake light. After fitting the bulbs, insert the piece back into the boot lid and secure it with the plastic rivets.

Finally, check the correct operation of the lights after turning on the instrument panel.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulb on the Renault Clio
How to Replace the Third Brake Light Bulb on the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this short guide, you will see how to remove and replace the third brake light bulb on the Renault Clio. First, open the rear hatch of the boot an…
How to replace the brake light bulb of the Renault Clio.
How to replace the brake light bulb of the Renault Clio.
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) If you want to replace the brake light bulb of your Renault Clio by yourself, you should first carefully read the following guide and then apply the …
Replacing the Front Brake Pads on a Renault Clio
Replacing the Front Brake Pads on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide will show you the procedure for removing and replacing the front brake pads on a Renault Clio. First, lift the vehicle and remove the fron…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos