Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Filter on a Seat Leon 1

Model: Seat Leon 1M - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Cabin air filter

See other generations:
Video tutorial

Learn how to change the cabin air filter on a Seat Leon 1: the filter is located in the engine bay, at the base of the windscreen, specifically on the left side of the vehicle when viewed from the front, directly in front of the passenger (for left-hand drive vehicles).

Unscrew the two flange screws using a star screwdriver, then remove the rubber seal located under the bonnet and lift the cover towards you, using small oscillating movements to remove it. Remove the cover and detach the two support tabs at the base of the filter.

Extract the old filter and carefully clean the container of dust and debris, insert the new filter respecting the direction of the arrows, replace the cover, reposition the lid, put the seal back in place, and close the bonnet.


Posted on 6 March 2026 by ScegliAuto


Related tutorials

Where is the Cabin Filter Located in the Seat Leon?
Where is the Cabin Filter Located in the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) In this video, you will see where the cabin filter is located in the Seat Leon and how to proceed if you need to replace it, a very simple and quick …
How to Replace the Cabin Filter on a Seat Leon?
How to Replace the Cabin Filter on a Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) In this tutorial, you will see how to replace the cabin filter on a Seat Leon 5F, a very simple and quick operation. The filter is located behind the…
How to replace the cabin filter in the Seat Leon?
How to replace the cabin filter in the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) In this tutorial we can see how to replace the cabin filter in the Seat Leon, an extremely simple and fast operation. First of all, go to the passeng…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos