Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Seat Ibiza

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Service warning light

Resetting the oil light is a very simple and quick operation that can be easily performed by anyone independently. Just follow these instructions. First, locate and hold down the "0.0/Reset" button situated centrally between the rev counter and the speedometer. At the same time, turn on the ignition and release the button as soon as you see a message on the onboard computer display asking if you want to proceed with the reset. At this point, press the button once to confirm, and shortly after, the reset is successfully completed.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Seat Ibiza
How to Reset the Oil Light on a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) To reset the oil light on a 2008 Seat Ibiza, model L, you need to: with the instrument panel off, press the button/dial located to the right of the s…
How to Reset the Service Light on the Seat Ibiza
How to Reset the Service Light on the Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Follow these instructions to reset the service light for routine oil change maintenance on the Seat Ibiza. First, get inside the vehicle and ensure a…
Resetting the Service Light on the Seat Ibiza
Resetting the Service Light on the Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) In this guide, you will learn the steps to reset the service light for the regular maintenance oil change on the Seat Ibiza. First, get in the vehicl…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos