Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Seat Mii?

Model: Seat Mii MK 1 - Years 2011-2021
Part: Service warning light

To reset the Service light on the Seat Mii, you need to hold down the 0.0/SET button located on the right side of the instrument panel while it is turned off. While continuing to hold down the button, turn the key in the ignition to turn on the instrument panel. Keep holding down the button until the INSP light disappears completely from the instrument panel. To verify that the reset was successful, simply turn off and turn on the instrument panel again by turning the key.

Posted on 18 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Seat Mii?
How do you reset the Service light of the Seat Mii?
Seat Mii (2011-2021 / MK 1) The procedure for resetting the Service light on the Seat Mii involves inserting the ignition key, turning it to turn on the instrument panel without…
How do you reset the Service light on the Seat Mii?
How do you reset the Service light on the Seat Mii?
Seat Mii (2011-2021 / MK 1) To reset the Service light that appears on the instrument panel of the Seat Mii, you need to insert the ignition key, turn it to turn on the instrume…
How do you reset the Service light on the Seat Mii?
How do you reset the Service light on the Seat Mii?
Seat Mii (2011-2021 / MK 1) To reset the Service light on the Seat Mii, you need to insert the ignition key and turn it to turn on the instrument panel without starting the car.…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos