Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust installed on the Sherco 500, you need to loosen the screws that secure the covering panel on the right side of the motorcycle, near the rear fender. Once the panel has been removed, you can unscrew the bolts that hold the exhaust tip to its supports and loosen the clamp connecting the exhaust to the collector. Once the old exhaust tip has been freed, you can position the new one: it can now be secured with screws, ensuring that everything is functioning properly.

Posted on 2 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Changing the Engine Oil on Sherco 500
Changing the Engine Oil on Sherco 500
Sherco 500 In this tutorial, learn how to replace the engine oil on a Sherco 500. First, remove the oil drain bolt with a socket spanner, located at the bottom;…
Engine Oil Change for the Sherco 500
Engine Oil Change for the Sherco 500
Sherco 500 Before starting the engine oil change on the Sherco 500, ensure the bike is stable and secure to protect the operator's safety. This precaution shoul…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos