Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Engine Oil on Sherco 500

Model: Sherco Sherco 500
Part: Engine oil

Video tutorial

In this tutorial, learn how to replace the engine oil on a Sherco 500. First, remove the oil drain bolt with a socket spanner, located at the bottom; then also remove the upper cap to allow the oil to drain out more quickly. Wait about twenty minutes before refitting the bolt and remove the filter by unscrewing its bolt; replace it with a new one and pour the engine oil into the designated upper hole (capacity of approximately 1.1 - 1.3 L); fill to the indicated level.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Engine Oil Change for the Sherco 500
Engine Oil Change for the Sherco 500
Sherco 500 Before starting the engine oil change on the Sherco 500, ensure the bike is stable and secure to protect the operator's safety. This precaution shoul…
How do you replace the muffler of the Sherco 500?
How do you replace the muffler of the Sherco 500?
Sherco 500 To replace the exhaust installed on the Sherco 500, you need to loosen the screws that secure the covering panel on the right side of the motorcycle,…

How to Replace the Headlight Bulb on the MV Agusta Brutale 800RR?

To replace the headlight on the MV Agusta Brutale 800, you need to loosen the screws that secure the corresponding optical unit: these screws will be located on the sides and underneath the headlight. Once the screws are removed, you can extract the optical unit from its housing and disconnect the connector located inside; at this point, you can remove the bulb inside so that you can insert the new one. The headlight can now be secured with the appropriate screws to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos