Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco St 290
Part: Engine oil

You can perform the engine oil change procedure on the Sherco ST 290 by loosening the drain plug of the oil sump, which is located at the bottom of the vehicle: once the oil has been completely expelled, collecting it in a suitable container, you can seal the drain plug again. At this point, you can top up the oil: you will need to insert the necessary amount of engine oil through the breather on the right side of the bike. When the top-up is complete, you can close the plug and check that everything is functioning.

Posted on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Piston on a Sherco ST 290
How to Replace the Piston on a Sherco ST 290
St 290 To replace the piston on a Sherco ST 290, access the top of the engine. Disconnect all cables connected to the cylinder. Inside the cylinder, you wil…
How to Replace the Sprocket on the Sherco ST 290?
How to Replace the Sprocket on the Sherco ST 290?
St 290 To replace the sprocket on the Sherco ST 290, loosen the screws securing the cover on the left side of the bike. Once removed, locate the underlying …
How to Replace the Rear Shock Absorber on the Sherco ST 300
How to Replace the Rear Shock Absorber on the Sherco ST 300
St 290 To replace the rear shock absorber on the Sherco ST 300, loosen the central nut of the rear wheel so that it can be completely removed and the chain …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos