|
Do it yourself
| |||
| ||||
How to Replace the Fuel Pump on the Sherco SEF 300?
Model: Sherco Sef 300
Video tutorial
To replace the fuel pump on the Sherco SEF 300, first loosen the screws securing the seat of the bike to its housing. This will allow you to access the fuel pump underneath. Proceed by disconnecting the fuel lines and the fastening screws that secure the pump to its seat. The old pump can now be extracted from its housing, and the new one can be inserted, secured with screws, connected, and then covered with the seat.
Posted on 5 November 2026 by ScegliAuto
Related tutorials
Sef 300
In order to replace the fuel filter of the Sherco SEF 300, you need to locate the fuel passage conduit where the fuel filter is located: this will be…
Sef 300
In order to replace the exhaust of the Sherco SEF 300, you need to loosen the screws that secure the panel located on the rear side of the motorcycle…
Sef 300
To replace the spark plug on a Sherco SEF 300, completely remove the seat of the bike to access the components underneath. Here, you will locate the …
|
How to Reset the Service Light on a KTM Duke 200?
To reset the Service light on a KTM Duke 200, turn on the ignition by turning the key in the ignition switch. Once the dashboard is lit, navigate through the menu by repeatedly pressing the SET button located on the left side of the dashboard. When the spanner icon appears, press and hold the SET button for a few seconds until the spanner light disappears and the maintenance interval is reset. Finally, turn off the dashboard by turning the key. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |