Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Mv Agusta Dragster 800

Model: Mvagusta Dragster 800
Part: Antifreeze coolant

This video is currently unavailable

Today, discover the procedure to replace the coolant in the Mv Agusta Dragster 800 motorcycle, as well as the Brutale. First, place your motorcycle on a stand and begin by removing the small side plastic fairing to access the coolant reservoir cap; then, unscrew the drain screw located at the bottom of the water pump casing, allowing the fluid to drain into a container for about ten minutes.

At this point, top up with the new coolant suitable for your radiator.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the MV Agusta Dragster 800?
How to Replace the Exhaust on the MV Agusta Dragster 800?
Dragster 800 To replace the exhaust on the MV Agusta Dragster 800, loosen the screws securing the component at the rear, near the mudguard on the right side of th…
How to Replace the Clip-ons on a MV Agusta Dragster 800
How to Replace the Clip-ons on a MV Agusta Dragster 800
Dragster 800 This guide provides the main instructions on how to remove and replace the clip-ons on a MV Agusta Dragster 800. First, place the bike on a stand and…
How to Replace the Exhaust of the MV Agusta Dragster 800?
How to Replace the Exhaust of the MV Agusta Dragster 800?
Dragster 800 To replace the exhaust of the MV Agusta Dragster 800, loosen the screws that secure the exhaust to the upper support and the one that secures the cla…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos