Do it yourself
Frequently asked questions about cars and motorcycles
The exhaust pipe of the MV Agusta Dragster 800 can be replaced by loosening the screws that secure the component on the back, near the fender on the right side of the motorcycle. Once the screw that secures the exhaust pipe to this support has been loosened, it will be possible to unscrew the one that locks the fastening ring located between the exhaust pipe and the remaining part of the exhaust manifold. Once these two screws have been loosened, it will be possible to completely detach the old exhaust pipe, so that it can be replaced with a new one.

Posted on 21 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Dragster 800 It will be possible to replace the exhaust of the MV Agusta Dragster 800 RC by loosening the screws that secure the exhaust terminal to its housing o…
Dragster 800 To replace the exhaust on the MV Agusta Dragster 800, loosen the screws securing the piece at the rear, near the rear mudguard. Once the screw fixing…
Dragster 800 On board the MV Agusta Dragster 800, the operation of replacing the exhaust pipe is carried out by unscrewing the screws that fix the piece on the si…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos