Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this short and simple guide, we will see the instructions that will allow us to change the time on the display of the instrument panel of the Benelli Leoncino 500. First of all, put the motorcycle on the stand and start the instrument panel; then press and hold the left button of the panel until the time voice flashes, as shown in the video. At this point, use the right button of the panel to change the time, pressing the left button to go to the minutes and perform the same procedure, following the video tutorial until the end!

Posted on 16 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Benelli Leoncino 500?
How to Replace the Battery in a Benelli Leoncino 500?
Leoncino 500 In this tutorial, we will see how to replace the battery in a Benelli Leoncino 500, a very simple and quick operation. First, ensure that the instrum…
How to Replace the Spark Plugs on a Benelli Leoncino 500
How to Replace the Spark Plugs on a Benelli Leoncino 500
Leoncino 500 This guide will show you how to remove and replace the spark plugs of the engine on the Benelli Leoncino 500 motorcycle. First, place the motorcycle …
How do you replace the spark plugs of the Benelli Leoncino 500?
How do you replace the spark plugs of the Benelli Leoncino 500?
Leoncino 500 In order to replace the spark plugs of the Benelli Leoncino 500, you need to completely remove the fuel tank from its housing, along with the seat: t…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos