Do it yourself
| ||||
|
Model: Sherco Se R 250
Here is a simple tutorial for you to restart your Sherco after the winter break. Check the candle and clean it using FINE GRAIN sandpaper. Use a feeler gauge to verify that the spark plug gap is at 0.8. Remove the carburetor by removing the clamp and the two screws of the guillotine, open it and check that it is clean and with the o-r still intact. Check the brake fluid reservoir, which is in a complicated position. If the liquid needs to be changed, drain it from the special valve, as shown in the video, and insert the new liquid until it comes out clear.
Posted on 3 January 2024 by ScegliAuto
|
How to remove and replace the front wheel of the Honda Nc 750XToday we will see, in this short and simple guide, how to disassemble and replace the front wheel of the Honda Nc 750X motorcycle. First of all we put our bike on the central stand and we start to unscrew the fixing screws of the front brake caliper, in order to remove it from the disc; let's then loosen the central pin of the wheel, using a socket wrench, as shown in the video. At this point we lift the wheel from the ground with a jack or front stand; remove the pin and replace the wheel, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.003
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |