Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before you can start, download the package of your Sherco 290 Trial and place it on a large surface. Begin by tearing and removing the cardboard from the package, using a utility knife. Next, remove the various protective films by simply pulling them towards you. Once done, remove the bike from the support pallet by pushing it forward. At this point, you will have successfully opened and removed the package of your Sherco 290 Trial, and you will be free to assemble the various components and proceed with the first engine start.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cooling Fan from a Sherco 290 Trial
Removing the Cooling Fan from a Sherco 290 Trial
Sherco 290 Trial In today's tutorial, we will go through the main steps to remove the radiator cooling fan from a Sherco 290 Trial. First, remove the screws from the …
How to Replace the Clutch on a Sherco 290 Trial
How to Replace the Clutch on a Sherco 290 Trial
Sherco 290 Trial To replace the clutch on a Sherco 290 Trial, loosen the bolts securing the cover on the right side of the bike to remove it. Once the cover is off, y…
How to Replace the Clutch on a Sherco 290 Trial?
How to Replace the Clutch on a Sherco 290 Trial?
Sherco 290 Trial To replace the clutch on a Sherco 290 Trial, you need to loosen the bolts securing the cover on the left side of the bike so that it can be removed. …

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos