Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sherco
    3. : Sherco 290 Trial

Sherco Sherco 290 Trial - Videoguide

Sherco Sherco 290 Trial
How do you replace the fork seal of the Sherco 290?
To replace the fork seal on a Sherco 290, you need to loosen the bolts that secure it to its housing, freeing it from the wheel and steering: once the fork has …read all…
Posted on 21 April 2023 by ScegliAuto
Sherco Sherco 290 Trial
How do you replace the Sherco 290 Trial clutch?
Replacing the clutch on the Sherco 290 Trial is done by loosening the bolts that fix the casing positioned on the right side of the bike, so that it can be …read all…
Posted on 12 May 2023 by ScegliAuto
Sherco Sherco 290 Trial
How is the Sherco 290 engine removed?
In order to disassemble the Sherco 290 engine, it is necessary to unscrew the screws that fix the engine to its supports: in this way the engine can be …read all…
Posted on 11 October 2022 by ScegliAuto
Sherco Sherco 290 Trial
How do I replace the Sherco 290 Trial clutch?
In order to replace the Sherco 290 Trial clutch you need to loosen the bolts that secure the crankcase cover positioned on the left side of the bike, so that …read all…
Posted on 13 May 2022 by ScegliAuto
Sherco Sherco 290 Trial
Sherco 290 Trial Cooling Fan Disassembly
In today's video tutorial we will see the main steps to be able to disassemble the radiator cooling fan of a Sherco 290 Trial. First of all, let's remove the …read all…
Posted on 5 March 2024 by ScegliAuto
Sherco Sherco 290 Trial
How to open the package of a Sherco 290 Trial
Before we can begin, we will need to unload the package of our Sherco 290 Trial and place it on a large surface. Let's start by going to tear and remove the …read all…
Posted on 4 February 2024 by ScegliAuto
Checks and maintenance (1) (1) Clutch (2) Engine (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos