Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the fork seal on a Sherco 290, loosen the screws that secure it to its housing, freeing it from the wheel and the handlebars. Once the fork is removed, you can detach the upper part by sliding out the spring inside. You can then use a tool like a screwdriver to pry off the seal located halfway up the fork. Once the old seal is removed, position and secure the new one, then reassemble the fork.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Package of a Sherco 290 Trial
How to Open the Package of a Sherco 290 Trial
Sherco 290 Trial Before you can start, download the package of your Sherco 290 Trial and place it on a large surface. Begin by tearing and removing the cardboard from…
How to Replace the Clutch on a Sherco 290 Trial
How to Replace the Clutch on a Sherco 290 Trial
Sherco 290 Trial To replace the clutch on a Sherco 290 Trial, loosen the bolts securing the cover on the right side of the bike to remove it. Once the cover is off, y…
How to Replace the Clutch on a Sherco 290 Trial?
How to Replace the Clutch on a Sherco 290 Trial?
Sherco 290 Trial To replace the clutch on a Sherco 290 Trial, you need to loosen the bolts securing the cover on the left side of the bike so that it can be removed. …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos