Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cooling Fan from a Sherco 290 Trial

Model: Sherco Sherco 290 Trial

Video tutorial

In today's tutorial, we will go through the main steps to remove the radiator cooling fan from a Sherco 290 Trial. First, remove the screws from the fairings of your bike using a screwdriver; then unscrew and remove the control unit and disconnect the fan's electrical connector.

Next, remove the fixing rivets by drilling them out, and take out the fan as shown in the video. Finally, replace it with the new one, securing it with the rivets, following the tutorial to the end!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Open the Package of a Sherco 290 Trial
How to Open the Package of a Sherco 290 Trial
Sherco 290 Trial Before you can start, download the package of your Sherco 290 Trial and place it on a large surface. Begin by tearing and removing the cardboard from…
How to Replace the Clutch on a Sherco 290 Trial
How to Replace the Clutch on a Sherco 290 Trial
Sherco 290 Trial To replace the clutch on a Sherco 290 Trial, loosen the bolts securing the cover on the right side of the bike to remove it. Once the cover is off, y…
How to Replace the Clutch on a Sherco 290 Trial?
How to Replace the Clutch on a Sherco 290 Trial?
Sherco 290 Trial To replace the clutch on a Sherco 290 Trial, you need to loosen the bolts securing the cover on the left side of the bike so that it can be removed. …

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos