Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To dismantle the engine of a Sherco 290, unscrew the bolts that secure the engine to its mounts. This will allow the engine to be extracted from its housing, and you can then unscrew the bolts that secure the crankcase halves. At this point, the engine can be opened, but only after removing the clutch from its position; once the engine is opened, you can access its internal components and replace them as necessary. Finally, reassemble the engine by placing it back in its housing and securing it to the mounts.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Package of a Sherco 290 Trial
How to Open the Package of a Sherco 290 Trial
Sherco 290 Trial Before you can start, download the package of your Sherco 290 Trial and place it on a large surface. Begin by tearing and removing the cardboard from…
How to Replace the Clutch on a Sherco 290 Trial?
How to Replace the Clutch on a Sherco 290 Trial?
Sherco 290 Trial To replace the clutch on a Sherco 290 Trial, you need to loosen the bolts securing the cover on the left side of the bike so that it can be removed. …
Removing the Cooling Fan from a Sherco 290 Trial
Removing the Cooling Fan from a Sherco 290 Trial
Sherco 290 Trial In today's tutorial, we will go through the main steps to remove the radiator cooling fan from a Sherco 290 Trial. First, remove the screws from the …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos