Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Sm 50
Part: Checks and maintenance

To replace the handlebars of the Sherco SM 50 R, first you need to grab the grips at the ends of the handlebars and pull them outwards to remove them from their housing. Once the old grips have been removed, you can unscrew the central bolts that fix the handlebars to the front fork and then disconnect the cables connected to the brake and clutch levers. At this point, the handlebars can be completely removed and replaced with a new spare part. This should be fixed with its bolts, then connect the brake and clutch cables and insert the grips.


Posted on 27 October 2024 by ScegliAuto



How do you replace the exhaust pipe on the Sherco SM 50?
Sm 50 The exhaust terminal of the Sherco SM 50 can be replaced by unscrewing the screw located in the central rear part of the saddle, so that the latter c
How do you replace the exhaust pipe of the Sherco SM 50?
Sm 50 In order to replace the exhaust on the Sherco SM 50, you need to loosen the screws that secure the exhaust terminal to its housing. Once the screws h
How do you replace the Sherco SM 50 muffler?
Sm 50 In order to replace the muffler of the Sherco SM 50 you have to unscrew the screw located in the central rear part of the saddle, so that the latter

How to change the motor oil of a KTM Duke 390?

To change the motor oil on a KTM Duke 390, start by placing the motorcycle on a stable stand to ensure it is in a vertical position. Under the engine, locate the oil drain plug and remove it with the appropriate wrench, allowing the used oil to completely drain into a suitable container. Once the oil has completely drained, screw the drain plug back on and tighten it properly. Next, locate the oil fill opening on the engine and fill it with the recommended new oil, using a funnel to prevent spills. Check the oil level to make sure it is correct, adding more oil if necessary. After completing the filling, start the engine and let it run for a few minutes to distribute the new oil. Finally, turn off the engine and check the oil level again, adding more if needed.

Watch the video!


by ScegliAuto

More videos