|
Do it yourself
| |||
| ||||
Model: Sherco Ty 125
This guide provides instructions for removing and replacing the engine cover on the Sherco TY 125 enduro bike. First, place your bike on a stand and start unscrewing the fixing screws on the sides of the cover, gently prying it off with a thin tool. Clean the mounting surface of the cover to make it perfectly smooth, as shown in the video. Now, reassemble the new engine cover, inserting the gasket first and securing everything properly!
Updated on 1 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Ty 125
To replace the engine sump on the Sherco TY 125, loosen the screws securing the sump to its housing on the lower part of the bike on the right side. …
Ty 125
To change the engine oil of the Sherco TY 125, loosen the screws that secure the oil drain plug located at the bottom centre of the bike. Once remove…
Ty 125
To replace the exhaust pipe of the Sherco TY 125, loosen the old pipe by unscrewing the bolts at the front of the bike near the engine. Once these pi…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
