|
Do it yourself
| |||
| ||||
How to Replace the Engine Sump on the Sherco TY 125
Model: Sherco Ty 125
Video tutorial
To replace the engine sump on the Sherco TY 125, loosen the screws securing the sump to its housing on the lower part of the bike on the right side. Once all the bolts are loosened, detach the sump and remove the underlying gasket. After these parts are removed, collect any oil spills in a suitable tray positioned under the bike; then insert the new gasket and reattach the sump with the appropriate bolts.
Updated on 2 June 2026 by ScegliAuto
Related tutorials
Ty 125
This guide provides instructions for removing and replacing the engine cover on the Sherco TY 125 enduro bike. First, place your bike on a stand and …
Ty 125
To replace the exhaust pipe of the Sherco TY 125, loosen the old pipe by unscrewing the bolts at the front of the bike near the engine. Once these pi…
Ty 125
To replace the exhaust silencer on a Sherco TY 125, loosen the screws that secure the silencer to its housing. This will allow you to completely deta…
|
How to Replace the Headlight Bulb of a Triumph Speed Twin?
To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |