Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust silencer on a Sherco TY 125, loosen the screws that secure the silencer to its housing. This will allow you to completely detach the silencer from the remaining part of the exhaust manifold. Before fully removing it, widen the ring that connects the silencer to the exhaust pipe to enable complete removal. At this point, insert the new silencer into its place, securing and connecting it properly. After installation, check that everything functions correctly.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Ty 125 To replace the exhaust on the Sherco TY 125, loosen the screws securing the clamp that connects the exhaust to the rest of the exhaust system. Once t…
Ty 125 To replace the exhaust pipe of the Sherco TY 125, loosen the old pipe by unscrewing the bolts at the front of the bike near the engine. Once these pi…
Ty 125 To replace the battery in the Sherco TY 125, you need to unscrew the screws that secure the right side panel of the bike, just below the front part o…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos