Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the Sherco SEF 300?

Model: Sherco Sef 300
Part: Engine oil

Video tutorial

To change the engine oil on the Sherco SEF 300, access the central lower part of the bike where the oil drain plug is located. This can be unscrewed with a suitable spanner, and all the used oil should be collected in an appropriately placed container.

Once the oil has completely drained, unscrew the screws securing the left-side cover to remove the oil filter inside. After replacing the filter, close the cover and the drain plug, pouring new oil into the breather located on the right side of the bike.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Sef 300 Here are the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Sherco SEF 300 enduro…
How to Change the Engine Oil of the Sherco SEF 300
How to Change the Engine Oil of the Sherco SEF 300
Sef 300 To change the engine oil of the Sherco SEF 300, access the central lower part of the bike, where the oil drain plug is located. This can be unscrewed…
How to Change the Engine Oil on the Sherco SEF 300
How to Change the Engine Oil on the Sherco SEF 300
Sef 300 You can change the engine oil on the Sherco SEF 300 by loosening the screws that secure the skid plate located at the central bottom of the bike. Onc…

How to Replace the Headlight Bulbs on a Kawasaki ZX-10R

In this tutorial, you will see how to replace the headlight bulbs on a Kawasaki ZX-10R, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by locating the circular cap at the rear of the headlamp, then unscrew it and disconnect the power connector. Next, release the metal clip, extract the old bulb from the housing, and without touching the glass directly with your bare hands, insert the replacement. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos