Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Sef 300
Part: Engine oil

To change the engine oil of the Sherco SEF 300, access the central lower part of the bike, where the oil drain plug is located. This can be unscrewed with a suitable spanner, and all the used oil must be collected in a properly positioned container. Once the oil has completely drained, unscrew the bolts securing the left side cover of the bike to remove the oil filter located underneath. After replacing the filter, refit the cover and the drain plug, pouring new oil through the filler hole on the right side of the bike.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Sef 300 Here are the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Sherco SEF 300 enduro…
How to Change the Engine Oil on the Sherco SEF 300?
How to Change the Engine Oil on the Sherco SEF 300?
Sef 300 To change the engine oil on the Sherco SEF 300, access the central lower part of the bike where the oil drain plug is located. This can be unscrewed …
How to Change the Engine Oil on the Sherco SEF 300
How to Change the Engine Oil on the Sherco SEF 300
Sef 300 You can change the engine oil on the Sherco SEF 300 by loosening the screws that secure the skid plate located at the central bottom of the bike. Onc…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos