Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the motor oil in the Sherco SEF 300?

Model: Sherco Sef 300
Part: Engine oil

Video tutorial

The oil change of the Sherco SEF 300 can be performed by accessing the central lower part of the motorcycle, where the oil drain plug will be located. This plug can be unscrewed with a specific key and all the used oil must be drained into a properly positioned container.

After all the oil has completely drained out, the screws that secure the left side cover of the motorcycle must be unscrewed in order to remove the oil filter located under the cover. Once the filter has been replaced, the cover and drain plug can be closed, and the new oil can be poured through the refill hole located on the right side of the vehicle.


Posted on 14 August 2025 by ScegliAuto


Related tutorials

How to change the engine oil on the Sherco SEF 300?
How to change the engine oil on the Sherco SEF 300?
Sef 300 You can change the engine oil on the Sherco SEF 300 by loosening the drain plug located at the central lower part of the bike: once this plug is remo…
How to Change the Engine Oil on the Sherco SEF 300
How to Change the Engine Oil on the Sherco SEF 300
Sef 300 You can change the engine oil on the Sherco SEF 300 by loosening the screws that secure the skid plate located at the central bottom of the bike. Onc…
Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Sef 300 Here are the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Sherco SEF 300 enduro…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos