Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Skoda Yeti

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

Video tutorial

Replacing the cabin air filter on this car model is very easy and does not require dismantling dashboard components; the filter is located on the passenger side, just below the glove compartment, practically above the footwell; you only need to remove the sound-absorbing fabric cover by unscrewing the two plastic clips; at this point, the filter housing is immediately accessible, and you must unclip the cover, extract the old filter, remove any dirt residue, and then insert the new one, orienting it according to the direction of the airflow.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2012 Skoda Yeti?
How to Reset the Service Light on a 2012 Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) If you own a 2012 Skoda Yeti and want to manually reset the service light independently, simply follow the steps outlined in this guide. First, inser…
Resetting the Inspection Warning Light on a Skoda Yeti
Resetting the Inspection Warning Light on a Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) Let’s briefly go through the steps and instructions that will allow you to reset the service light for routine maintenance on a Skoda Yeti in simple …
How to Reset the Service Light on a Skoda Yeti
How to Reset the Service Light on a Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) These simple steps will show you how to reset the service light for the routine maintenance oil change on the Skoda Yeti. First, get in the vehicle a…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos