Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard Trims on a Skoda Yeti

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Dashboard

Video tutorial

If you want to give a new look to your car's interior, consider covering the dashboard trims with a carbon fibre or mahogany effect. With films or wrapping, you can achieve very unique and original effects.

To carry out this procedure, start by removing the trims, beginning with the central console frame that surrounds the radio and climate control buttons. At this point, open the glove compartment and lever along the edge of the trim to detach it. Proceed in reverse to install the new trim.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to replace the car radio with a multimedia system on the Skoda Yeti
How to replace the car radio with a multimedia system on the Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) Below we will see the necessary information to disassemble and replace the factory radio with a new multimedia system in the Skoda Yeti. First, let's…
How to Reset the Service Light on a 2012 Skoda Yeti?
How to Reset the Service Light on a 2012 Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) If you own a 2012 Skoda Yeti and want to manually reset the service light independently, simply follow the steps outlined in this guide. First, inser…
What is the fuse layout for the Skoda Yeti?
What is the fuse layout for the Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) In this video, you can see where the fuse boxes for the Skoda Yeti are located and their respective layouts, to consult if you need to check the fuse…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos